AFOPLUS's MPO optical cable enhanced with a state-of-the-art push-pull design, which is not only simplifies installation but also makes maintenance a breeze, allowing technicians to effortlessly connect and disconnect cables, saving valuable time during network upgrades or troubleshooting. Boasting an impressively low insertion loss of ≤0.35dB, it sets a new standard in signal integrity. Optical signals travel through with minimal degradation, ensuring your data is transmitted with uncompromised accuracy and speed, critical for the high-intensity data traffic within a data center. Constructed with multimode OM3 fiber, it's engineered to handle the most demanding bandwidth requirements. The 8-core MPO fiber jumper multiplies connectivity options, packing multiple optical fibers into a compact space, reducing clutter on patch panels and enhancing wiring density.

Connector A	MPO Male	Connector B	MPO Male
Fiber Count	8 Fibers	Polish Type	PC to PC
Fiber Mode	OM3 50/125μm	Wavelength	850/1300nm
Polarity Type	Type B	Cable Jacket	PVC-OFNR (Riser)
Trunk Outside Diameter (OD)	3.0mm	Cable Tensile Strength (Long/Short Term)	100/200N
Minimum Bend Radius  (Fiber Cable)	20/10D (Dynamic/Static)	Min. Bend Radius (Optical Fiber)	7.5mm
Insertion Loss	≤0.35dB	Return Loss	≥30dB
Operating Temperature	-20 to 70°C (-4 to 158℉)	Storage Temperature	-20 to 70°C (-4 to 158℉)