Free Shipping on Orders over $99 for Whole USA​

 sales@aofplus.com    +1 ‪323 319 4593

MPO LC Fiber Patchcord (1)
MPO LC Fiber Patchcord(2)
MPO LC Fiber Patchcord (3)
MPO LC Fiber Patchcord (4)

Fiber Optic Patch Cable|Fiber Optic Patchcord MPO-LC/UPC Female 8 Cores Type B Multimode OM4 Corning Low Loss 0.35dB Max 3.0mm OFNP Plenum 15m (50ft)

SKU: AMOLLUF1M4OP15

Price range: $51.32 through $65.80
Buy more to save

Length
1m(3ft)2m(6.5ft)3m(10ft)5m(16.5ft)7m(23ft)10m(33ft)15m(50ft)20m(66ft)25m(82ft)30m(98ft)
  • Shipping via DHL/FedEx |
  • 1 year Warranty
  • 30 Days Returns
  • 30 Days Exchange
2392586 200

Warranty
Providing industry-leading limited lifetime warranty. Read the table for details of all  products' warranty.
 
Returns & Exchange
Refunds will be received about  5 business days after the receipt of returned items. Items in stock  for replacement can be shipped within  1 business day. Read the full return policy for details.

  • Free Shipping on Orders over $99 for Whole USA
  • If order <50pcs, ship next day; if order 51-100pcs, ship within 48hours(except Friday); if order 101-500pcs, ship in 4 working days, if order 500pcs+, negotiate the shipping time.
QuantityPrice
1 - 4$65.80
5 - 49$62.51
50 - 99$57.90
100 +$51.32

Fiber Optic Patch Cable|Fiber Optic Patchcord MPO-LC/UPC Female 8 Cores Type B Multimode OM4 Corning Low Loss 0.35dB Max 3.0mm OFNP Plenum 15m (50ft)

Specifications

With precision-terminated ends and premium-grade OM4 fiber, this MPO fanout patch cable delivers high-performance connectivity for short-range 40G and 100G applications. The female MPO connector provides compatibility with MPO infrastructure, and the LC/UPC ends allow rapid connection to switches, routers, or optical transceivers. The 0.35dB Max low-loss spec improves signal margin, especially in high-density installations. Flame-retardant and plenum-rated, the 3.0mm jacket ensures safe installation in air return environments. Supporting Type B polarity, this cable allows proper alignment for parallel transmission. Whether you're connecting patch panels, breakout modules, or direct server links, this patchcord meets your bandwidth and safety needs.
Connector AMPO FemaleConnector BLC/PC
Fiber Count8 FibersGlass FiberOM4
Polish TypePC to PCCable JacketPVC-OFNP (Plenum)
Wavelength850/1300nmPolarity TypeType B
Trunk Outside Diameter (OD)3.0mmTensile Strength (Long/Short Term)110/370N
MPO Insertion Loss≤0.35dBLC Insertion Loss≤0.30dB
MPO Return Loss≥25dBLC Return Loss≥35dB
Min. Bend Radius (Fiber Cable)20/10D (Dynamic/Static)Minimum Bend Radius (Optical Fiber)10mm
Operating Temperature-20 to 60°CStorage Temperature-20 to 60°C

Videos

Applications

FAQ

Check for debris in the port or on the connector pins-clean both with approved tools. Misalignment (e.g., keyway mismatch) is another cause; ensure the connector's key aligns with the port's slot before pushing.?
Yes. Unlike copper, fiber is immune to EMI/RFI, so it can coexist with power or Ethernet cables without interference. Just avoid crushing the fiber cable under heavy copper bundles.?
OM4 fiber and LSZH jackets withstand -20??C to +60??C cycling without significant loss. Extreme fluctuations may cause minor jacket contraction/expansion, but this rarely impacts signal integrity if installed with proper slack.?
The 3.0mm jacket offers basic protection, but heavy pressure can crush fibers or cause micro-bends. Avoid foot traffic over cables; use cable protectors or floor ducts in high-traffic areas.?
Short-term moisture (e.g., spills) won't harm fibers, but prolonged immersion can degrade connectors or cause jacket swelling. Dry connectors thoroughly if wet, and replace the patchcord if water enters the fiber cladding.?

Reviews

Reviews

There are no reviews yet.

Be the first to review “Fiber Optic Patch Cable|Fiber Optic Patchcord MPO-LC/UPC Female 8 Cores Type B Multimode OM4 Corning Low Loss 0.35dB Max 3.0mm OFNP Plenum 15m (50ft)”

Your email address will not be published. Required fields are marked *

Downloads

Contact Sales

This field is for validation purposes and should be left unchanged.
Consent(Required)